HSP 800H Drum Welding machine

Our HSP 800H is our fastest drum welder with welding speeds ranging from 300 to 900 drums an hour! Our welder has over 28 advantageous features, compared to classical or competitors' welders. Read more...

LSP 300 Drum Welding machine

Looking for a high quality drum welder at lower speeds? Then our new low speed LSP 300 is the perfect machine for you!

SyncronAC welding control

SyncronAC

Ever thought about saving up to 60% on power consumption whilst producing drums?

Do not hesitate to ask us for more information about our award-winning SyncronAC system!

Erichsen tester

Not convinced of the perfect quality you get with our welders? Need to provide your customer with evidence about your top-notch weld qualities?

Be sure to check out our Erichsen tester!

Erichsen tester for drum welding quality test

Our top model Arplas HSP 800 drum welder

Our HSP 800 drum welder is the top of the bill, featuring:
  • Drum diameters from 355 to 600 mm
  • Drum length from 440 to 1100 mm
  • Material thickness from 0.5 to 1.5 mm
  • Production speed from 350 to 900 drums per hour.
Our HSP 800 drum welder

This machine has 28 advantageous features compared with classical welders and competitors' welders, such as:

  • 3 roll forming roll with breaker bar reducing leading edge flat.
  • Anti scratch feature as a standard allowing production of prepainted shells.
  • Timing belt body transfer, higher speed at lower maintenance.
  • Single flatbed frame with full length linear guides.
  • Automatic electronically controlled pusher speed.
  • Full insulated lap gauge with replaceable wear strips.
  • Complete constructed stainless steel weld heads, no copper castings.
  • Cleaning device for upper and lower weld electrode.
  • Simplified shifting system for upper and lower weld electrodes.
  • Upper and lower weld heads cantilever mounted, resulting in advantages such us:
    • Better sheet introduction.
    • More and better control of weld start.
    • Higher welding speeds possible, (up to 16 meter per minute).
    • All fixed current connections (no flanges).
    • Easy removable conductor shells for maintenance.
    • Drive motors mounted directly on weld heads, electronically linked, without long shafts and couplings.
  • Automatic greasing of weld heads as a standard.
  • Long life shafts with thermally crimped electrodes the most cost effective system.
  • Fast interchangeable hour glass rolls, allowing to change diameter in less than 10 minutes, and giving advantages of hourglass rolls over skew rolls.
  • High performance digital welding control with secondary constant current correction. The best and most easy to use.
  • Automatic anti blocking system to stop the welder automatically in case of a blockage of the sheet.
  • Options such as: planisher, take away conveyors, spare parts packages, other hour glass rolls for different diameters, automatic stackers etc. available.

Image gallery