HSP 800H - HSP 800M

Our HSP 800 drum welder is the top of the bill following features:

• Drum diameters from 355 to 600 mm
• Drum length from 440 to 1100 mm
• Material thickness from 0.5 to 1.5 mm
• Production speed from 350 to 900 drums per hour.

This machine has 28 advantageous features compared with classical welders and competitors\' welders, such as:

• 3 roll forming roll with breaker bar reducing leading edge flat.
• Anti scratch feature as a standard allowing production of prepainted shells.
• Timing belt body transfer, higher speed at lower maintenance.
• Single flatbed frame with full length linear guides.
• Automatic electronically controlled pusher speed.
• Full insulated lap gauge with replaceable wear strips.
• Complete constructed stainless steel weld heads, no copper castings.
• Cleaning device for upper and lower weld electrode.
• Simplified shifting system for upper and lower weld electrodes.
• Upper and lower weld heads cantilever mounted, resulting in advantages such us:
  • Better sheet introduction.
  • More and better control of weld start.
  • Higher welding speeds possible, (up to 16 meter per minute).
  • All fixed current connections (no flanges).
  • Easy removable conductor shells for maintenance.
  • Drive motors mounted directly on weld heads, electronically linked, without long shafts and couplings.
• Automatic greasing of weld heads as a standard.
• Long life shafts with thermally crimped electrodes the most cost effective system.
• Fast interchangeable hour glass rolls, allowing to change diameter in less than 10 minutes, and giving advantages of hourglass rolls over skew rolls.
• High performance digital welding control with secondary constant current correction. The best and most easy to use.
• Automatic anti blocking system to stop the welder automatically in case of a blockage of the sheet.
• Options such as: planisher, take away conveyors, spare parts packages, other hour glass rolls for different diameters, automatic stackers etc. available.